Difficulties upgrading

[Rohit_Bhandari]

no android lite mode

[Rohit_Bhandari]

is there android lite mode available on FAW 1.3 for optimus2

[none]

LEMFO LEM P 4gb + 64gb (Prime style watch) support thread

Again, just so everyone knows… The LEM P, Prime S, Optimus 2 and any of the other supposedly “Dual Mode” watches are not Dual Mode in reality. Unlike the original Optimus watches that did have “dual operating mode” and the watch would boot into the BT environment. This is because the Dual System mode is actually just a cut down version of the launcher that prevents the user from using the majority of Android apps and some services. So booting into the BT system is not required and does not ha…

[Rohit_Bhandari]

yes i am missing android lite mode that saved my battery a lot😊

[pablo11]

@Rohit_Bhandari No - it didn’t really.
It is just hiding apps in the menu.
You can just use power saver instead of using a fake “masking” system.

[Armen_Tangyan]

Guys can u fix sensor issue plssssssssssssss
In 1.3 I want to slide down to turn on wifi but sometimes when I try slide down watch doesn’t understand this is reallly annoying.
Plus step count shows with minus sign

[Armen_Tangyan]

Actually did but for safety did 2nd time.Currently I have issue with notifications.When notifications comes out I try slide it to see but shows 0 notification s

[chris_johnson]

hello, i went to 1.3b3. didn’t like it. not a daily driver. so i went down to faw 1.4 , worked good then went to version faw 1.0 installed fine, tried locale update to go to faw 1.2, no go. got the dying android robot. tried to download the legacy 1.0 but says it’s not there. what do i do

[pablo11]

Flash stock and then update to 1.0

The FAW version is designed to not allow downgrade apart from flashing back to stock.

[chris_johnson]

Where can I find the stock rom? And is the version 1 the legacy rom, if so the links do not work.

[noidremained]

the stock rom is 1.4 and you’ll find the newest version of 1.0 in the top post of the following thread: International Firmware Beta [V1.3] (Optimus2, Prime2, LEM12Pro, LEM14, LEM15)

[chris_johnson]

thanks, BUT version 1 that you referred to is a zip file and version 1.4 does not have local update

[pablo11]

That’s correct.
Stock firmware requires flash tools and the international firmware is for updating from the watch storage using the built in OTA software.

[chris_johnson]

okay, when i put the version faw 1 in watch storage the file is a zip and there are question marks on all the other files in the zip, then it says file is unknown format

[pablo11]

I hope you read up on how to use the update zip? This is for the S10 LEM 14 but it is the same as all the other watches.

@pablo11

BACKUP YOUR IMPORTANT DATA
You just copy the attached zip file to the watch storage and turn off network.
Then go to Settings, About Watch and choose wireless update.
Then long press power button and choose square screen mode and press the back button.
The Wireless update now shows in square mode.
In the top - right corner, click on the three little dots and choose Local Update.
Choose the zip file you copied across earlier and flash will begin.
It will take a while.
Once complete - please make a full factory reset as this is major update.
That’s it. No need to use flash tools.

[pablo11]

Make sure you only download the FAW firmware from this post. V1.0 is attached to it

International Firmware Beta [V1.3] (Optimus2, Prime2, LEM12Pro, LEM14, LEM15)

Please note that the recovery certificate has been changed to allow upgrades from the default firmware to all FAW versions. All new builds also including a factory reset on upgrade. Changelog for V1.3-Beta4: Added factory reset on local upgrade. Adjusted weather layout for metric and imperial setting. Replaced moon phases component, it is now provided by the weather host. Various launcher fixes and adjustments. Known issues: The notification system is not finished yet. Links removed until…

[Armen_Tangyan]

When I ordered my watch version was 1.5

[pablo11]

Does not matter.
If you flash 1.4 you can take the OTA if it is available.
Or just update to International v1.0.
Either way, flashing v1.4 stock is fine
Just remember that you need flash tools to install stock firmware.

[Armen_Tangyan]

After flash just tried OTA update no update available.
But in the end end up with FAW 1.0 cause tap to wake function is really nice I am trying to avoid buttons use to make their life longer

[pablo11]

Yep, fair enough