Official Support thread for LEM14

doesnt work; throws error during update/install from local file

Have you visited the FAW thread?
If you do, you will notice that there are some steps to follow if you are still on old versions of the FAW firmware.
Which is why @G1NT0N1C posted the stock firmware.

1 Like

Thanks man for everything you guys do. I did visit faw and missed something. Ill check it out again

1 Like

So i revisited faw forum, i think im reading correctly that i need to use sp flash update method. Ive got sp installed and mt6765_android_scatter.txt now im fighting usb communication issues on win 11. Ill keep you guys posted. Any “usb connection type” required (ie, no data transfer, ptp,midi, usb tethering, file transfer) AND (control decvice phone or PC). Ill get this done eventually but tips are appriciated,

Turned off watch and trying to get fireware update function running on SP but not booting "cannot pass bootrom command! Possible power up too early? no powerup . Preloader USB Vcom showing up.

Look here for flashing stock firmware

Thanks for all the help! thing that finally did the trick for me was enabling usb debug mode in developers options (might not have been nessary); getting a newer version of SP Flash Tools (5.2208); and using the Zip file in original post (unzipped, selected scatter file located in image\MT6765_Android_scatter.txt); turning off watch then clicking download in Smart Phone Flash Tool THEN plugging in device. You guys rock!

1 Like

Good news - thanks for the feedback :+1:

Hi, guys. Suddenly have lost GPS signal. Cannot remember what I have done, but GPS test see the satellites, but not taking them in work. All app that should use the GPS getting the locations from Wi-Fi or celular data.

The sports app cannot worck properly, because have no GPS data!

The question is:
Where is the point is settings that changes of the location sources references such as A-GPS, Only satellites, only cellular data sources?

Its difficult if you cannot explain what you have done . I would factory reset the watch

3 Likes

What is your geo location?
I mean what country are you in?

Also check Settings / Location / Advanced and make sure Google Location Accuracy is enabled.

If you enable developer options, you can download and use the MTK engineering mode shortcut app from the play store.
It has the ability to reset agps data and test the watch location services.

Otherwise, as @Dr_Andy_Vishnu says - factory reset

2 Likes

Factory reset did not help!
Everything is still the same =(
The GPS Test application sees satellites (apparently via the Internet), but does not take them into work. Google maps also see the location only when the Wi-Fi is connected. Maybe the GPS module is dead? How to check it?


Photo1
Photo2
Photo3

@MichaelV
I thought I was already quite clear about using the built in engineering tool set, which is accessible if you did what I said before :thinking:

2 Likes

It would be too easy.
Does NOT work

It’s working fine for me…?
What firmware are you using?
Did you enable developer options and USB debugging?
You know how to enable developer options right?

This is the right app

2 Likes

Of course I did! I even cannot manage the watches without Vysor at all.

Stock firmware

Well, in that case it really looks like you’re up Shxt Creek :pensive:
I have no idea why it’s working fine for me and not for you… Engineer Mode I mean.

I’m stumped?

1 Like

Hi everyone,

i had the latest Raw File RC1 on my notebook, but it was deleted by my son :slight_smile: Can someone provide me with this file to install the custom rom on my Lem 14 please. Regards

You can find it in the download area.

3 Likes

@G1NT0N1C he’s only a level 1 user.

@mafri you have been a member since September last year but you have only posted 7 times. This means that your membership level is 1 (basic user).

Recently we had to restrict access to the firmware to level 2 members and above.
This is because people were just signing up, downloading the firmware and then their watch would get messed up because they didn’t know what they were doing, or they just disappear…

I would encourage you to have a look around, read more topics and post comments or questions.
You will reach level 2 very quickly if you want to.

4 Likes