By the way, please do not try to flash the firmware from a LEM 12 pro or Prime 2.
It simply will not work due to the differences I mentioned before…
1 Like
I have posted on this thread (messages no 114-116 ) my findings about lem14 gnss reception and what you have to do for getting the best accouracy and precision .
2 Likes
Hi Pablo, thank you but enabling Google accuracy was one of the first things I tried. Unfortunately without GPS I can’t use this watch… I have bought another model, from another Brand and hopefully that will work.
It’s a pity this has such bad GPS as all the rest works fine (except super long charging time).
Thanks anyway for the support.
Very strange indeed.
I will talk to Lemfo about this.
It is worth returning it because it can be something as simple as the GPS antenna connection is failing to connect to the main board.
Hi - do we have any further info on when an update might arrive? I’ve had my Lem14 a week and as far as I can recall, the contacts didn’t sync, I had to use Watch droid (or maybe it was import/export vcf) … should a watch shipped that recently have the update, if it has been created, do you think?
We cannot say with certainty whether and when there will be an update. However, there is a solution for syncing the contacts:
-Trouble Syncing Contacts with Google on Lem 12 Pro - #9 by Rajiv_Shah
1 Like
Thanks, Gin, you’re my favourite drink. As I mentioned in my post, I managed to do it by - I think - transferring the .vcf file. (I’ve done so many set-up things it’s hard to remember exactly what I did and when.)
1 Like
@keithyd
Yes, it’s all dependent on the brand.
I have asked lemfo to read the feedback here but so far they have not announced any updates.
Which version are you using at the moment?
2 Likes
Android 10.7. Came with the watch. I don’t remember it updating when I started it for the first time, though I suppose it might have - I just didn’t notice.
Yes that is the standard version.
They labelled it 10.7 but that is really meaningless.
It’s just Android 10.
1 Like
To whom it may concern.
Just because you don’t see a thread regarding your topic does not mean that you just randomly post it in a thread like this.
We are waiting for the information to be sent to us before we open the support sections for the next devices for a good reason… Just remember what happened with the LEM14 originally …!!!
Last warning - please keep this thread on topic.
Thanks.
3 Likes
Patience creates a rose.⚘ Or a new update .
We hope 
1 Like
Hello everyone! I just received my Lem14 from Banggood, but it is not starting. It is complicated to make the return and I would like to open it to check if the battery is badly connected.
Does anyone have a manual or instructions for doing this? Greetings!
Do you hold power on for 4 seconds ?
Yes, I did some tests too, but it didn’t work.
1 Like
If after charging it fails to turn on i would return it before its too late . Opening it up may reduce your chances of a replacement
2 Likes
if you have a voltmeter, you can also check the cable. If you measure the outer two pins, it should be about 5 volts.
You should also try different chargers.
1 Like
If you open it and try to fix it then I can almost guarantee that it will not work again.
It’s not a simple job getting to where the battery connects to the main board.
As it is specially sealed in the factory (apparently) to be waterproof - you will also void the warranty.
Just make a very quick video of you connecting the charger and trying to power it on and then return it to Banggood.
It’s the best option really.
4 Likes
Done - check it out 
3 Likes
Hello Dear Pablo11 
Thank you very much ! This is really a perfect job! I’m right: patience creates ⚘ or a super system upgrade:watch: Everything works perfectly I’m really happy 
You are the BEST 
Best Regards 
Michel56
3 Likes