No, that is the best option to use.
If you are worried about the firmware version you can always flash back to the previous version…
This is a wierd problem I have to admit…?
It’s almost as if the watch has been placed next to a strong magnet…
This kind of distortion can be caused by a magnetic field.
So - it was fine before you flashed it?
I mean the screen was fine?
Sept 27, 2018 9:00:27 GMT 1 pablo11 said:bicboi69
No, that is the best option to use.
If you are worried about the firmware version you can always flash back to the previous version…
This is a wierd problem I have to admit…?
It’s almost as if the watch has been placed next to a strong magnet…
This kind of distortion can be caused by a magnetic field.So - it was fine before you flashed it?
I mean the screen was fine?
All I’ve done so far was made the watch worse, i don’t think the battery issue has been fixed either.
Don’t bother with the factory reset or any other attempts to fix it.
I have confirmed that this is a known issue for only some watches…
A new version will be available soon to address the problem.
Flashing back to v1.5 should fix the problem if it is intolerable for now.
Don’t bother with the factory reset or any other attempts to fix it.
I have confirmed that this is a known issue for only some watches…
A new version will be available soon to address the problem.
Flashing back to v1.5 should fix the problem if it is intolerable for now.
I thought I posted it in the firmware page for these watches…
I’ll have a look
It’s here goo.gl/mxotg7
I had posted it in the firmware section as well…
Some reports came back to me saying that they thought the BT calling apk was missing from this version… But I did not understand why ?
If it’s missing - let me know.
Try the Firmware Upgrade option in the flash tool again.
It is the best option.
Cheers
Pablo11
Sept 27, 2018 9:44:44 GMT 1 RASC Moderators said:bicboi69It’s here goo.gl/mxotg7
I had posted it in the firmware section as well…
Some reports came back to me saying that they thought the BT calling apk was missing from this version… But I did not understand why ?
If it’s missing - let me know.
Try the Firmware Upgrade option in the flash tool again.
It is the best option.
Cheers
Pablo11
Thanks Pablo! I’ve seen in another thread regarding a solution for the BT call, but seems a little complicated for me. So the special firmware for v1.6 is not out yet or is it already available somewhere?
Sept 27, 2018 9:44:44 GMT 1 RASC Moderators said:bicboi69It’s here goo.gl/mxotg7
I had posted it in the firmware section as well…
Some reports came back to me saying that they thought the BT calling apk was missing from this version… But I did not understand why ?
If it’s missing - let me know.
Try the Firmware Upgrade option in the flash tool again.
It is the best option.
Cheers
Pablo11
bicboi69
No, I will get it tonight.
Have a little faith in our capabilities 
but yea i would still suggest a dedicated thread for a complete guide to rooting. Or does it already exist? I havent gone too deep into this forum n check anything thats a year old
bicboi69
I am receiving it now from China.
I can upload it overnight for you. It is a bit slow so as I am in Australia and it is already 8pm - it will be tomorrow.
There is no need for a guide.
A custom recovery has been developed and is here on the forum in the development section.
It’s a very simple process to flash the recovery and then either flash SuperSu or Magisk and the job is done. 
There is no need for a guide.
A custom recovery has been developed and is here on the forum in the development section.
It’s a very simple process to flash the recovery and then either flash SuperSu or Magisk and the job is done.
I do wonder how long does it usually take for the battery meter to read properly? Yesterday was my 3rd day with it and it was still draining quickly. Since i only just flashed the firmware i guess I’ll have to wait n see how it goes for now? Whats your take on this? Bad battery or was it zeblaze original v1.5 firmware? 
This is getting a little frustrating
EDIT: I also just installed shareit and accubattery. At the moment im pretty sure my battery meter is messed up since i literally flashed it like 5 times today n the battery reading was jumping back n forth after every flash 
There is no need for a guide.
A custom recovery has been developed and is here on the forum in the development section.
It’s a very simple process to flash the recovery and then either flash SuperSu or Magisk and the job is done.
Sept 27, 2018 12:11:56 GMT 1 bicboi69 said:There is no need for a guide.
A custom recovery has been developed and is here on the forum in the development section.
It’s a very simple process to flash the recovery and then either flash SuperSu or Magisk and the job is done.
And I would like to report that the v1.6 firmware seems to turn off my watch while its charging… maybe you could help me verify if that’s common seeing that this v1.6 firmware isnt very compatible with my device
He has the 1.6 version.
He flashed it today but is suffering from bad power consumption and artifacts on the screen at the 3 o’clock position.
I got confirmation and it is a known issue with version 1.6.
I am thinking that outdated Google Services might be causing the power problem. Once it’s updated I think it would improve,…
I am thinking that outdated Google Services might be causing the power problem. Once it's updated I think it would improve,.....
But it seems like battery aint too bad on v1.6 now. What do u think? 93% to 78% after almost 3hours. Only BT n Wrist gesture on. Pedometer is off as well.
Sept 27, 2018 12:35:15 GMT 1 leafar said:Sept 27, 2018 12:11:56 GMT 1 bicboi69 said:
And I would like to report that the v1.6 firmware seems to turn off my watch while its charging.. maybe you could help me verify if that's common seeing that this v1.6 firmware isnt very compatible with my device :/
Just flash the 1.6 version and try to root it and place the boot from Magisk manager patch and the TWRP recovery in so flash tool this version is better
