OK, before you guys ask, here’s the PRIME 2 report. Putting them here under the LEM14 for comparison rather than spread across the different threads. OK to move them if you want:
Please download Device Info HW and upload your device data as described here.
1 Like
Haha, should I wait until you guys hash out which is the best of these apps to use to get the data to see, especially for battery capacity? I see there’s dozens of them in the Play Store. Please let me know which ONE is the best one and I’ll download it and do this all over again. Thanks.
This one seems to be really good Mr Ticks. More Detailed
Please download Device Info HW
1 Like
Thank you. Yes good value and ordered today now that I understand all the specs. I was concerned about the side camera quality, but if at least 5MP then it is at least as good as my current LemX, and the camera quality on it is fine.
2 Likes
I didn’t suggest ‘Device Info HW’ to @SmartWatch_Ticks as it requires the PRO version to produce a report.
But it is still the best.
That’s the point…
1 Like
What does the report look like? (I didnt buy it)
Also how is it the best? I did evaluate it briefly but nothing really jumped out at me.
It is better because it provides the most accurate information and provides an excellent pdf report containing all the information.
1 Like
@SmartWatch_Ticks I end up watching the full 2 parts review of the rollme s08… which is nice and thorough
I wonder if s08 battery dock is compatible with the new lem14
Hmm, be very careful about this.
The safest thing to do is use the cable provided.
Some polarity tests would be needed before trying this.
Yeah thanks for the advise… just i knew mr ticks would know what is needed to try this since he have both devices
Yes, the LEM14 works in the S08 dock just fine. I’ve got a problem with one of the data pins on the dock being short now, so I can’t get data connection to my computer for either watch, but with a little wiggling I got a hint that it would connect for a second, so with a fully functional dock, even data transfer through the dock should work. The LEM14 definitely charges on the dock by itself.
2 Likes
OK, I’ve uploaded it to Device Info HW. It’s showing as a MT6739 KirinX. Not much data there though. Much more in the actual report on the watch screen. Cameras are identified as 5MP and 2MP and battery is 1000mAh. If I can extract that full report shown in separate tabs on the watch face in the app, I’ll post it here for you.
2 Likes
Yikes, the 1.000mAh battery is what made me cancel my order - the Prime has 26% more, the Prime 2 has 60% more. But I’m sure Kospet will create another A10 watch similar to the original Prime (like there was the Hope, then the Prime), which I’ll love as much as I love my Prime! 
1 Like
Thanks, the camera is indeed a real 5MP (GC5035) sensor and a 2MP (BF2253L) sensor.
It is unfortunately not easily possible to identify the battery capacity, the listed 1000mAh are the android default setting that is supplied to the device info tools.
One method is to check the battery calibration data that is used to calculate the fuelgauge:
- LEM12Pro ~750mAh
- Prime2 ~1500mAh
Please note that this values are not a perfect representation of the real capacity, they are probably the median result of the factory battery calibration process.
Then there might be some other factors like a lower battery cut-off voltage that could increase the capacity but also shortens the battery life.
Based on those references it is likely that you could add 5-10% more capacity on the listed values to match the real specification battery capacity.
2 Likes
Here’s the specific stuff on cameras and battery. Sorry, formatting has been stripped but it’s title/value oriented.
CAMERA
Model
5.0 MP GalaxyCore gc5035mipiraw
bf2253lmipiraw
Supported
5.0 MP GalaxyCore gc5035_mipi_raw
bf2206_mipi_raw
bf2206sub_mipi_raw
bf2253l_mipi_raw
SOFTWARE
Camera
0 - BACK
Resolution
4.9 MP (2560x1920)
Aperture
f/2.8
Focal length
5.0 mm
Focus modes
infinity
Sensor size
2.9x5.64
Pixel size
~1.82 µm
View Angle
32.3°
Image formats
JPEG, YUV_420_888, YV12
ISO
100-1600
Color Filter
BGGR
Orientation
90
Flash
no
Camera
1 - FRONT
Resolution
2.0 MP (1600x1200)
Aperture
f/2.8
Focal length
5.0 mm
Focus modes
infinity
Sensor size
2.9x5.64
Pixel size
~2.92 µm
View Angle
32.3°
Image formats
JPEG, YUV_420_888, YV12
ISO
100-1600
Color Filter
BGGR
Orientation
270
Flash
no
Camera2 API
full
BATTERY
Level
79 %
Health
Good
Status
Discharging
Power source
Battery
Technology
Li-ion
Temperature
36.0 °C
Voltage
3992 mV
Charge speed
142.0 mA
Power profile
1000 mAh
2 Likes
Thank you Mr Ticks
The Prime is too big and bulky. I mean the LEM12 PRO is already to big and bulky for me. I’m just putting up with it. It’s not appealing for me. People laugh at my LEM12 PRO cause it’s so big. 
When I see strangers in public, first thing they look at is my watch, not me. I know what they are thinking. I’m not a fashionista, actually I’m the opposite. I’d like to be a shadow in the night. If you know what I mean. This is the reason I didn’t get the Optimus Prime 2 Watch. But looks like the LEM12 PRO is still too big for people.
I’d prefer a watch that is lightweight and obviously they would have to optimise the firmware and drivers/design. But that all comes to a cost $$$. Ya can’t win
I’d get the apple watch but it’s not android and doesn’t support a sim card. My telco(Boost) doesn’t support e-sim atm.
If these designers can make a copy of the apple watch that supports a sim card with android 11, I’d buy it quick as a flash. Yes I’m willing to pay a bit extra for it, the price I’d pay so that I don’t get laughed at.