After probing to push down both buttons at same time, looks like answer as OKAY (Just unlcked???)
but no way
I jus tried again to fastboot flash recovery recovery.img and still look like not unlocked
Read through the LEM T FAQ thread as all the details are there.
You will have to patch your boot image with magisk.
Easy enough to do on a mobile phone.
I have concerns about the twrp working on the different screen type.
So, until this is properly tested I suggest you patch the boot image, install magisk manager on your watch and flash the patched boot image using the flash tool.
The scatter file and the boot image should be fine and flash using download only.
Once you have booted and turned on Wi-Fi, magisk should be able to run the update and install the zip file.
Hopefully that will be all you need to do.
If you have problems it could be that a 32 bit version of Android is needed to patch the boot image.
See how it goes. At least you have the stock firmware now…
My LEM T Arrived today, the D variant.
Build quality is good, but unfortunately my IMEI got blocked. it seems ever imei started with 86XXXXXX got blocked here, the one started with 35XXXXXX not. even when both not registered in my country database.
I hope in the future all FAW IMEI will start with 35XXXXX to avoid blocking
EDIT: I don’t believe the first thing I do when receiving mine was to change IMEI lol, but luckily everything available online. but I won’t point anything here though since it’s illegal
I am in indonesia.
here’s changing imei isn’t illegal but most chinese imei phone have it’s imei blocked.
unless it’s legally imported by local company it is, since personal import you will not doing some registering imei stuffs
In case anyone interested to have face unlock in LEM T firmware, you can using files in this folder. I pull it from ticwris 1.9 firmware.
Put HeilsFaceUnlock folder in system/priv-app and WearScreenLock folder in system/app
Anyone have a recommendation about wall charger used in LEM T?
I using 5v 1A wall charger but it’s hot like hell (both charger and LEMT), using USB port from my laptop for charge also makes the watch fairly hot.
Usually I charge my FAW using USB port but since this WAY hotter than usual for LEMT, I am exploring other alternatives.
Any thought?
Thank you before.
Cannot over emphasize how important “clean” contacts, in some but not all situations. I clean mine with alcohol every time, this time of year because of sweat. Even a thin film of residue on the contacts can cause resistance at the small cable tips, which can result in heat and or refusal to charge. I have experienced both and is why I clean them religiously.