Hello guys, 20 people have the special of none
Moderator/Primary FAW FW Developer Kernel for Optimus pro 3/32 Downloaded can not give anything
No.
None has been very busy and rarely visits these days.
People have to make a living and have a real job.
So, if he replies, great.
If he doesnāt - now you know why.
I understand
Now after a long time I also have a little time. I recently bought the Optimus pro itās a disaster battery 7h then I saw the lem14 super has more battery shaft 24h I bought it
Now Iāve looked at everything with their super fourm and have tried around, so Iāve tried out a lot of firmware and lo and behold Optimus per shaft more now so far 24h Iāve only managed it with bottles of firmware S08_C7S_Rollme_V1. 2_20200514_P.7z only the file system. Img flashed super is.
Itās great and useful that so much is being contributed, but it should be pushed to the point that the things that are shared can also be shared years later and that this also persists for moderators and normal users
I understand, but this is not really a development forum.
Weāve tried a couple of times, but as you can see - people have time and turn out some great work.
Then something happens and the free time is no longer available.
So devs come and go.
This is the nature of contributions made in good will and in free time.
Hovatek is probably the best place to start if you want this kind of stuff.
To be honest, this is now such an old release - there is very little interest in it these days.
No, that shows again how much potential there is in the devices and how much potential there is in the new devices, which remains unused
We are still annoyed about the runtime and overheating on the arm
Who is we?
And how does this nugget of information change anything about what I already said earlier?
friend, could you get the firmware for the kospet hope lite, please? Iāve already looked on the forum, and also on the manufacturerās website, but I canāt find a valid link.
Iāll have a look.
Unfortunately Kospet no longer have this firmware. It was erased by accident.
I might have a personal copy of this firmware.
Friend, if you could share this firmware, I would be very grateful!
I have checked. I donāt have it, Iām really sorry.
ok friend, thanks for your time in looking. I needed this firmware version to try a solution to the inverted screen problem on the Kospet Hope (topic link that describes the problem: Kospet Hope screen calibration) . I tried several watch firmwares with the same board model, and I couldnāt solve it.