Then use watchdroid but this version
2 Likes
Is that still recommended for Android 10 ?
I thought perhaps the newer ones were developed for Android 10, so I chose the new one for Prime 2 
Good point but worth a try . Other apps work well so i dont see why not
Iāve been using WDAās current version on P2 paired with Mate Xs. Works very well. Had to make a couple changes to Connecion Parametersā¦but now, very few to zero disconnects or FCās. All notifs and responses 100% functional.
E
how is the kp2 battery in daily use? whats the screen on time ?
can you assign a watch face as always on display or something similar?(am not sure about the screen type in kp2ā¦amoled or otherā¦?).
1 Like
How should I know? Iām not getting mine until after the weekend., 
2 Likes
does not work well when your phone is on android 10ā¦
1 Like
Which parameters ? Mine has some troubles with connecting in the mornings, but once connected it is good the rest of the dayā¦
Watchface is always on display on my Prime 2.
As it is not Amoled, no burning problem!
If you use Universal Launcher you can check an option that refreshes the screen every second only to save battery life.
I donāt even use it, I prefer to have sweeping second hand.
Without a SIM card in the prime 2 and with always on display (30 min max, in fact, manually switching on after that) I could have a working day use. (Wi-Fi activated)
Now I have a SIM card in the watch and datas on too, Wi-Fi, Bluetooth and even gps on.
I could have a short work day with those parameters.
As Iām retired, I use my nap time 
to charge the watch so I have plenty of battery to end the day.
I didnāt use the Prime 2 for sport activities so I have no idea what the gps impact isā¦
3 Likes
Under connection parameters:
All below checked:
Connect automatically
Vibrate when connect/disconnect
Connected keep awake to the smartwatch
Check if the connection service is active every certain time - Telephone
Do you turn off your watch at night to charge or leave on?
so regarding charging the kp2 batteryā¦is there a special voltage/max amps that kospet advises users not to go beyond while charging?(just like most smartwatch brands and wireless earbuds advised to use a max of 5 volts/1 amp)?.
To be honest I always use a 500ma charger because the slightly slower charge seems to last longer and it is less risky than using higher output chargers.
IMOā¦
1 Like
By the way, for instant messaging apps etcā¦
This permission is needed.
Unrestricted data accessā¦ Starting from watch settings and then apps and permissions.
2 Likes
Just be aware that the battery will suffer a bit if this is on all the timeā¦ But should not be too bad if using a Sim card.
WiFi will probably use moreā¦
1 Like
I will check those versions soon - can You possibly confirm what has been changed in this version?
My issue in general is:
I have used Watch Droid version 9.1.19.9 and it worked OK till the upgrade to Android 10 on the phone.
I am looking just for the possibility to activate the calls from the watch so that the phone starts calling - and that I am able to talk over the BT headset,
Since the upgrade to android 10 on the phone - call start only works when phone screen is ON and Watch Droid application is active on the phone screen (It can not be in the background) making it useless. so the issue is somehow related to the permissions / rights the application has on the phone.
Any way to add more permission to Watch Droid app on the phone so that I can make and receive phone calls through BT?
I would like, if possible, to add a double tap to activate the screen in the Kospet Prime 2 firmware, to save battery. The tilt feature to activate the screen also works well, but it activates several times involuntarily, consuming more battery.
I just wanted to confirm what droidtrix had found out back in November that Using an MVNO with an AT&T sim will not allow any editing of the APN what so ever. I had just received my Lemfo 12 Pro and spent all day trying to figure out why I couldnāt add or edit an APN for Freedom pop using AT&Tās sim. Was getting ready to send it back to China when I came across your post. Clearly this is an android 10 problem as it is on both Kospet 2 and Lemfo 12 Pro. I have a Kospet Optimus Pro and I can edit and Add APNās with the AT&T sim no problem so there is definitely an issue with AT&T sims and android 10. Droidtrix - Did you ever figure out a good method for getting the APN edit to stick. I only have access to other AT&T sims and they all do the same thing - No way to add or change APN. I will try and find a Sprint Sim and see if I can do a power on swap like you did and see if it will stick. Iām sure there will be many many more of us in the US that will run into this issue as AT&T is the largest MVNO in the country
2 Likes
Double tap to wake - Itās being tested at the moment but for various reasons, itās not a simple matter.
Fingers crossed that it will be ok
Its interesting because I have no problem editing my APN.
If you have another look at @droidtrix posts, you will see that he did manage it.
@Luk, you should be able to add permissions somewhere in the phones settings
@luisreche, why donāt you just press the button to wake it?
3 Likes