Jan 11, 2017 13:18:11 GMT 1 arilz said:Jan 11, 2017 9:24:51 GMT 1 trigerets said:
Ok, little boys and girls. I flashed the 15122016 rom for KW88 and instaled Eric's launcher 1.1.5. i have bunch of watchfaces and it doesnt drain battery at all... 2 days (with Bt only) and countingso my suggestion : Flash the firmware and enjoy
give some video link how to flash kw88worried it can bricked my watch …
ricktop, you are fakin great!!
I just have the face I wanted, this launcher 1.1.3 works with my S99 Kernel version 3.10.72 (8th July 2016)
Problems detected so far:
Anyone tried the KW88 firmware on a S99? should it work?
Best regards
OK so here is my finding on a Lemfo LF16 test (same as KW88 in operation).
1). All zip clockskin packages work well.
2). Most .watch files work but a lot do not. Still pretty good for the first try.
3). BT notification is just about useless. Sometimes it works sometimes it just stops. But you still get vibrations when notifications come in. Just nothing on the notification screen.
4). No popup when BT notifications do work. Just vibrations. Then when you go to the BT notification screen, the message is there.
5). Weather widgets work fine for me. No issues once added. I see other have issues.
6). Unable to set the launcher as default after a power recycle. You select “always” at the clockckin launcher prompt from the android system but that only stays for as long as you do not reboot. after a reboot, again it asks if you want the clockskin as default launcher. 
These are the results for a LF16, the KW88 may have different results. Not sure why it would, but maybe.
So with these issues, I have to revert back to the stock launcher. BT notifications is a must for me. But I would like to extend my thanks to Eric for a great job on this launcher. the rest is super GREAT !!! and I for one truly appreciate his efforts. Well done. Can not wait for version 1.1.6.
Eric, any idea when you think these issues will be resolved?
Thanks Again.
Jan 11, 2017 18:24:57 GMT 1 neoromani said:
ricktop, вы факин Грейт!!Просто у меня лицо, которое я хотел, это Launcher 1.1.3 работает с моей С99 версия ядра 3.10.72 (8 июля 2016)
проблем до сих пор:
- не погода (я знал, что)
- БТ отключении от телефона постоянно
кто-нибудь пробовал KW88 прошивки на С99? должна ли она работать?
С наилучшими пожеланиями
Jan 9, 2017 8:59:15 GMT 1 ggg said:
Hi, Eric, does not work on the weather widget on my watch. It is installed and shows the weather at the time of installation, but not updated. And on faces do not change the weather, always shows 00C clear weather.Many thanks for your work
With best regards.
ver.1.1.5
Jan 12, 2017 14:06:55 GMT 1 buddyrm said:
OK so here is my finding on a Lemfo LF16 test (same as KW88 in operation).1). All zip clockskin packages work well.
2). Most .watch files work but a lot do not. Still pretty good for the first try.
3). BT notification is just about useless. Sometimes it works sometimes it just stops. But you still get vibrations when notifications come in. Just nothing on the notification screen.
4). No popup when BT notifications do work. Just vibrations. Then when you go to the BT notification screen, the message is there.
5). Weather widgets work fine for me. No issues once added. I see other have issues.
6). Unable to set the launcher as default after a power recycle. You select “always” at the clockckin launcher prompt from the android system but that only stays for as long as you do not reboot. after a reboot, again it asks if you want the clockskin as default launcher.These are the results for a LF16, the KW88 may have different results. Not sure why it would, but maybe.
So with these issues, I have to revert back to the stock launcher. BT notifications is a must for me. But I would like to extend my thanks to Eric for a great job on this launcher. the rest is super GREAT !!! and I for one truly appreciate his efforts. Well done. Can not wait for version 1.1.6.
Eric, any idea when you think these issues will be resolved?
Thanks Again.
Hi Eric,
One more thing to add, I noticed the SIM, Bluetooth and Battery page does not report any signal strength for the SIM card. See attached picture. The old launcher works as you can see by the image. Maybe you can have a look to see why it does not report signal strength? It reports the network name which is strange, it is like half working.
Dear Eric
This is a problem I have seen from the beginning of Universal Launcher.
Press the Back or Home button or press the Power button on the clock
It turns off unconditionally.
It is right to turn off the clock screen. However, this behavior is not what we want when the app is running.
Home ie! I think I should go back to the clock screen.
It may be the problem of the KW88 alone.
Can weather and temperature issues get data from other apps?
Heartbeat too.
Because of the launcher you made, my KW88 is like life.
Waiting for the weather, temperature and heart rate to be displayed later …
Jan 12, 2017 23:00:46 GMT 1 jmsupery said:Jan 9, 2017 8:59:15 GMT 1 ggg said:
Hi, Eric, does not work on the weather widget on my watch. It is installed and shows the weather at the time of installation, but not updated. And on faces do not change the weather, always shows 00C clear weather.Many thanks for your work
With best regards.
ver.1.1.5
i have the same thing plus heart monitor always at zero for watch face that have it
Dec 22, 2016 14:43:30 GMT 1 arilz said:
Hi Eric, it's posible to disable this thing ?, and direct wakeup to our watchface,?here example of .watch that i download and working good
Thank You again
RASC Moderators
Administrator
link Download Launcher v1.1 ?
first message on page 1 v1.1.5
HI, recently got a kingwear kw88. Love it but would like to add more watchfaces.Understand that rictop created a launcher that will accept watchfaces from this forum. My question in on his thread he has a standalone app and a launcher. The launcher replaces the stock one on the kw88 what what is the standalonemail app for. Thanks
using the launcher is sufficient, the standalone app is not needed. The standalone app you can use for testing.
There is no need to quote the first post
Jan 12, 2017 23:07:06 GMT 1 buddyrm said:Jan 12, 2017 14:06:55 GMT 1 buddyrm said:
OK so here is my finding on a Lemfo LF16 test (same as KW88 in operation).1). All zip clockskin packages work well.
2). Most .watch files work but a lot do not. Still pretty good for the first try.
3). BT notification is just about useless. Sometimes it works sometimes it just stops. But you still get vibrations when notifications come in. Just nothing on the notification screen.
4). No popup when BT notifications do work. Just vibrations. Then when you go to the BT notification screen, the message is there.
5). Weather widgets work fine for me. No issues once added. I see other have issues.
6). Unable to set the launcher as default after a power recycle. You select “always” at the clockckin launcher prompt from the android system but that only stays for as long as you do not reboot. after a reboot, again it asks if you want the clockskin as default launcher.These are the results for a LF16, the KW88 may have different results. Not sure why it would, but maybe.
So with these issues, I have to revert back to the stock launcher. BT notifications is a must for me. But I would like to extend my thanks to Eric for a great job on this launcher. the rest is super GREAT !!! and I for one truly appreciate his efforts. Well done. Can not wait for version 1.1.6.
Eric, any idea when you think these issues will be resolved?
Thanks Again.
Hi Eric,One more thing to add, I noticed the SIM, Bluetooth and Battery page does not report any signal strength for the SIM card. See attached picture. The old launcher works as you can see by the image. Maybe you can have a look to see why it does not report signal strength? It reports the network name which is strange, it is like half working.
Hi Eric,
When do you intend to release 2.05 standalone app ?
Awesome work … one question if i may: I have this script for image opacity
({bl} >= 0 and {bl} < 8.3) and (("{bc}"==“Charging”) and 100 or 50) or 0 and
and that part about charging status does not seems to work … is it on my side or its not implemented yet? Sorry if i have missed something, this is my first try to get something working with watchmaker its not as intuitive as i would like to be … anyway i appretiate your effort, emulating this type of lua scripting is probalby pain
Jan 13, 2017 20:56:24 GMT 1 pascal said:
Hi Eric, When do you intend to release 2.05 standalone app ?
It’s already aligned.
Jan 14, 2017 2:21:59 GMT 1 astromedia said:
Awesome work ... one question if i may: I have this script for image opacity ({bl} >= 0 and {bl} < 8.3) and (("{bc}"=="Charging") and 100 or 50) or 0 and and that part about charging status does not seems to work .. is it on my side or its not implemented yet? Sorry if i have missed something, this is my first try to get something working with watchmaker its not as intuitive as i would like to be ... anyway i appretiate your effort, emulating this type of lua scripting is probalby pain
Jan 13, 2017 20:27:04 GMT 1 buddyrm said:Jan 12, 2017 23:07:06 GMT 1 buddyrm said:
Hi Eric,One more thing to add, I noticed the SIM, Bluetooth and Battery page does not report any signal strength for the SIM card. See attached picture. The old launcher works as you can see by the image. Maybe you can have a look to see why it does not report signal strength? It reports the network name which is strange, it is like half working.
Any chance to get the signal strength icon working with the Universal Launcher? See above image
