Hi. I use the luncher, its perfect, congratulations for the work done.small
dysfunction nevertheless, its the fact that when the screen is switched on, the needle screens are scrolled to position at the value of the New time. This scrolling of the hands is a little embarrassing beacuse one realizes that the watch is very Electric.
2.0.10 version is uploaded : new sound management and separate notification icon (will show the notification fragment or not). Enhanced compatibility and stability.
Apr 5, 2017 15:19:18 GMT 1 pchristofides said:
Eric, tested KW88 with 2.0.9 and has problems with notifications. Tested back with 2.0.8 and no problems except when hand gesture is enabled then notifications do not work again. I hope this helps. One question regarding timeout set to 3 sec when hand gesture enabled. Does it switch off the display? Because I found out that when using it battery drain occurs and if not using it battery is fantastic. Check whether 3 sec timeout is switching off the screen. Thanks again.
What is "hand gesture" in your case? Sorry, I have LF16 / DM368, that's why I'm not familiar with KW88.
wat the changlog in 2.0.10 ?
2.0.10 versionā¦
There is still a watch time delay when the screen on.
Apr 6, 2017 0:45:55 GMT 1 sojusa82 said:
2.0.10 version.. There is still a time delay when the screen on.
yup.any others changes ? battery life ?
Apr 6, 2017 4:33:27 GMT 1 samsungxp said:Apr 6, 2017 0:45:55 GMT 1 sojusa82 said:
2.0.10 version.. There is still a time delay when the screen on.
yup.any others changes ? battery life ?
as mentioned by erik in his prev post, this is a known issue regarding loading skin files that he is trying to search for best options.., hopefully it can be resolved , regarding improvement, yes there was, there are skins now working on my blitz, the overlaying on fonts and images , in some watch files is know doing good . good job on sound management.. Eric hopefully the heart rate will also work in my blitz he he
Apr 5, 2017 20:32:08 GMT 1 ricktop said:
2.0.10 version is uploaded : new sound management and separate notification icon (will show the notification fragment or not). Enhanced compatibility and stability.
I think it should be more personalized, so that each one does to his favorite style.
Ejm: I like the design to a style desing material and the design that takes the NO.1 D5+, others will like custom icons, etc etc xD.
do i need to uninstall the old ver b4 install new ?
Apr 6, 2017 8:00:10 GMT 1 samsungxp said:
do i need to uninstall the old ver b4 install new ?
No you don't
juz install.still monitoring
Sorry for my ignorance but that is the old b4?
Apr 6, 2017 10:58:27 GMT 1 benderlonso said:
Sorry for my ignorance but that is the old b4?
I guess b4 is before...
Apr 5, 2017 23:07:54 GMT 1 yawa said:Apr 5, 2017 15:19:18 GMT 1 pchristofides said:
Eric, tested KW88 with 2.0.9 and has problems with notifications. Tested back with 2.0.8 and no problems except when hand gesture is enabled then notifications do not work again. I hope this helps. One question regarding timeout set to 3 sec when hand gesture enabled. Does it switch off the display? Because I found out that when using it battery drain occurs and if not using it battery is fantastic. Check whether 3 sec timeout is switching off the screen. Thanks again.
What is "hand gesture" in your case? Sorry, I have LF16 / DM368, that's why I'm not familiar with KW88.
Hand gesture in KW88 is the function that enables the unlock/switch display on when you move your wrist.
Dear Eric,
Iāve forgotten my cable today at home ā¦ at last downloaded and installed your new version
and my first results are exciting! sound works, alarm works, no missed notifications so far ā¦ you made my day! Trying to play with the new sound/vibrate/normal settings - nice solution!
There is still a small lag when the watch goes on, but itās ok - it would be nice if you could optimize it though.
P.S. Sent a small donation to you THX!
Hi Ricktop congratulations on version 2.0.10 thanks for working so hard, I love the new notifications.
Is there any chance you can make this watchface work? It works fine on version 1.18 but not this new one
(Watch is off centre towards the bottom left hand corner).
Also I tried watchfaces downloaded from āwww.watchface.toā but I only get a black screen? Iāve tried unzipping and re-zipping them and also uploading just as the folder on its own but to no avail. There is a really good Tissot watchfaces I wanted to use but I cannot get it to workā¦
Help is much much appreciated!
Hi Ricktop,
the 2.0.10 version works great!, but I have the following issues on my KW88:
- Battery level on the clockskin get stuck sometimes, currently is on 100% and the battery itās at 78%
- Zip versions of clockskins getās black screens on the preview and also when you select one
- Battery drain (+70% used in one day) when wrisp option (hand gesture) is selected: I donāt know if this one is from a previous version or the last one.
If I donāt use the hand gesture, the battery duration is about 2 full days vs 75% day.
Thanks!
Apr 6, 2017 20:37:43 GMT 1 gdisckaraoke said:
Also I tried watchfaces downloaded from "www.watchface.to" but I only get a black screen? I've tried unzipping and re-zipping them and also uploading just as the folder on its own but to no avail. There is a really good Tissot watchfaces I wanted to use but I cannot get it to work......
No problem, just unzip and zip again, here the result :
Hello that application you use for notifications I have tried wiiwear or sinwear without identical but disconnected almost all day.
Thanks.
Eric, bad news, but no, I donāt want my money back
- First, I canāt change the current skin anymore! I can choose another skin, but it doesnāt become active and remains the same. Only after reboot I can see the new one.
- Missing notifications are there again
The watch goes on and shows me the clock skin, but if I swipe to the right I can see only āno notificationsā, sometimes I see old notifications but not the new one.
2a. And of course I would not like to see the clock, but directly the new notification when the watch goes on!
3. (old bug) After reboot all widgets are gone. If I add some new widget, I see the new widget and all old widgets are there again.
4. Sometimes (after reboot?) I get a question regarding permissions for ClockWatchSkin launcher, although Iāve already permitted everything!
5. (sometimes) After reboot, if a swipe to top to the screen with a SIM info and battery status, I canāt see the āblue circleā showing the battery (only percentage). In a āfew minutesā the circle is there.
Reinstalling the WatchClockSkin resolved everything EXCEPT 2a) which is IMHO very important! Well, sometimes it works, but I canāt say definitely when and why. My idea is the 4) - I guess that the launcher loses its permissions, it causes further problems. What do you think?
PS. Just happened again: Suddenly Iāve got a question regarding permissions for ClockWatchSkin and everything is working again - I can change clock skin, notifications arrive just in time and the smartwatch show them immediately. Confused ā¦