Hi, I got a new Lemfo Lem T with Firmware “DM100_LEMT_V1.1_20240115DW_20240117-0937” installed. But I miss some nice features from my old Ticwris Max which runs “Ticwris_max_v1.0_20200921W_20200922-0033” on it.
For that I found the Firmware “TICWRIS_MAX_V1.1_20210109W_20210109-0411”
that I have flashed to the LEM T. All Apps are working fine except the Step Counter is not reporting and Screen on raising is not functional too. Unfortunately I havn’t check that features are fine with “DM100_LEMT_V1.1_20240115DW_20240117-0937”.
Does someone know where to download the firmware “DM100_LEMT_V1.1_20240115DW_20240117-0937” ? I have emailed LEMFO but I havn’t received an answer yet.
Maybe there is a way to enable the pedometer using adb shell command / start service ? “Device Info HW” details that the Step Counter is available but the power is 0.0mA instead of 0.1mA from my old Ticwris Max.
How can I make the feature Step Counter working with the installed Firmware “TICWRIS_MAX_V1.1_20210109W_20210109-0411” ?
adb details the feature ex. Step Counter is available:
… snip …
feature:android.hardware.sensor.accelerometer
feature:android.hardware.sensor.barometer
feature:android.hardware.sensor.compass
feature:android.hardware.sensor.gyroscope
feature:android.hardware.sensor.light
feature:android.hardware.sensor.proximity
feature:android.hardware.sensor.stepcounter
feature:android.hardware.sensor.stepdetector
STEP_COUNTER
Sensor ID : 0
Sensor Name : STEP_COUNTER
Sensor Typ : android.sensor.step_counter
Vendor : MTK
Power : 0.0 mA
Reporting Mode : On change
STEP_DETECTOR
Sensor ID : 0
Sensor Name : STEP_DETECTOR
Sensor Typ : android.sensor.step_detector
Vendor : MTK
Power : 0.0 mA
Reporting Mode : Special Trigger
WAKE_GESTURE
Sensor ID : 0
Sensor Name : WAKE_GESTURE
Sensor Typ : android.sensor.wake_gesture
Vendor : MTK
Power : 0.0 mA
Wake Up Sensor : Yes
Reporting Mode : One shot
I run the Sensor Test and it details: This sensor doesn’t any readings, seems have error with sensor in this firmware. Does anyone here in the forum have an idea ?
That I can’t tell you if the step counter and Screen on raising are working using the original firmware. I don’t have it, so I can’t rollback "DM100_LEMT_V1.1_20240115DW_20240117-0937”
Now I am back on “TICWRIS_MAX_V1.1_20210109W_20210109-0411”. All functions are working fine except Screen on raising and Pedometer service. But both options are set to on. I can switch them off and on. Looking at the Device Info it details that the sensor Accelerometer is active but the power shows 0.0mA. On my BravePro it looks like the same but the power details 0.01mA.
So from my point of view the sensor hardware is fine but the firmware driver is missing or the application does not fit the sensor hardware.
Is there maybe a way to find out if the driver gets loaded using power on ? Or by using adb command ?
So it seems to be that the sensor driver is not part of the firmware “TICWRIS_MAX_V1.1_20210109W_20210109-0411” or the other once I found in this forum. Problem solved by Lemfo original firmware.
Received the original firmware "DM100_LEMT_V1.1_20240115DW_20240117-0937” from LEMFO. Thank you for that so much. After flashing the watch Pedometer and Screen on raising is working now.
