I had to repair my power button on the KW88, so I needed to disassemble the watch.
Here are some images of the disassembled parts.
My battery is an 350 mAh version.
If you try to do this yourself, be very careful. The plastic parts are brittle and break. Also the wires to the speaker and microphone may break and need to be resoldered.
We need to know what is the unsoldered connector. I hope the SDcard wires. I don’t have any idea where can i find the circuit diagram of this motherboard.
I know, that there is no slot for that, but if we could find memory on pcb board, we could make some modifications, and use the same slot for simcard and memory card in the same time.
I know, that there is no slot for that, but if we could find memory on pcb board, we could make some modifications, and use the same slot for simcard and memory card in the same time.
The mt6580 of course have SD card pinouts,but we don’t know it’s wired to PCB or not? We need to know PCB pinouts. In my earlier post you can see a not soldered connector place in red circle. If its contain the SD pins then we have luck and problem solved,but we need a schematic diagram or PCB pinouts.