I’ve got a very sensitive EMF meter which I just did some tests with to try to determine whether it is polling for a cell tower when in Airplane mode. I observed it for several minutes with cellular on and several minutes with cellular off (and all other radios off like Wifi and Bluetooth). With cellular on and the screen off it would oscillate constantly about once per second between 1.5 and 2 with an occasional bounce up to around 4.5 around once a minute. But with cellular off it stayed consistently even at 1.5 with no oscillation and no bounce up like it did on cellular. This may not be proof that it is not polling with cellular off but I think there is some other reason the battery runs down more with cellular off. Or at least it appears there is no EMF generating activity when cellular is off. There is a possibility that the cellular is transmitting a polling signal that is out of range of my meter but normally I believe it would detect any change in energy use in turning on a brief polling signal.
I would not be concerned about this.
I have discussed it with the solution provider and they are running some tests.
We have already tested a different version of firmware and seen the issue gone.
So, as I said before there will be updates and improvements as we go along.
We have to appreciate that Android 10 is very new and so we expect improvements as we move forward.
Android 7.1.1 was exactly the same.
So don’t worry…
The main thing is that the hardware board is extremely good and so firmware improvements can easily be deployed.
Thanks pablo. Not really concerned as much as just trying to add to the knowledge pool and always curious about why things do what they do. Glad to hear the issue is been worked out in updates. 
Thanks and I appreciate your feedback.
I just wanted to make sure that it is generally understood that these few quirks that we find are addressable…
That’s the important thing I guess.
Hello, do you really know when the watchs will be shipped ? My order placed the 26 october at Banggood is delayed 3 times and now they email me to tell me out of stock…
It was the last week…
Yes, 3 Days ago he told us what would happen today, and now you start falsely blaming him for not knowing what is going on, really…
Have you heard the expression about a glass being half full ? You really need an attitude change…
We have become very cautious about publishing start dates … 
It will appear at some point. This is for sure! 
This is the prime 2 thread. Let’s keep it clean.
I know and sorry for that, but maybe it’s good to know that maybe there will be a smaller watch for any of us who’s afraid of the Prime 2’s ginormous dimensions. I won’t trash this tread, but please, leave my post up to inform newbies like myself in this regard.
the mt6739 is limited to a total of 13 MP, but for the mt6762 the limit is 21 MP
nice knowing you 
if you look at banggood now you will see that it says they only have 4 preorders for the prime 2, while earlier it said maybe two or three hundred, so my guess is that the stock they received today was almost, but not quite enough to fulfil all the preorders
Banggood has been sending out since they started receiving stock…
You are right, that’s why you can’t see so many people waiting on back order…
@kiki_kiki you need to seek help.
I am sick of you a using me of not telling the truth.
I very clearly said that stock is going to be shipped out starting Monday this week.
They have been sending out stock since then…
Any posts not related to the Prime 2 will be removed.
If you want to discuss the watch you have mentioned please create another thread.
@StormChild
Cheers.
Thanks for the update @noidremained. I wasn’t sure on that - good news for smart watches like Prime 2 and others running the MT6762!
Correct. It has been mentioned before and was the cause of many arguments regarding the M6739…
In fact the M6739 has more limitations if dual cameras are used
Like the person with Lem 12 Pro problems, my Prime 2 also reboots on random occasions. This has happened several times in the last four days. Also, though most apps seem OK, some crash, one of which unfortunately is the government Covid tracking app. Universal Launcher also crashes a lot, or at least I think that’s what happens when it asks me to choose the home app over and over, I’m using the latest OTA update (1.4_20201031). I’m just reporting, not complaining - I expected there to kinks to work out.
Unless it is absolutely required of you I’d suggest you force stop, clear data and uninstall that government Covid tracking app and see how things go.
I uninstalled it when I discovered it wasn’t working.