Hello Sirs, I have a x1/K8 round watch and is totally black and it´s not charging nothing, not turning on and doing nothing. Is there any way to make a hard reset internally or any small button for resetting? Do you have this experience?Thank you vey much for your help
Take the rear cover off and disconnect the battery lead - very carefully. It kinda lifts off the board. Reconnect after 30 seconds and test.
If you don’t know what the battery cable looks like, have a read up and research it first.
Good luck. It works for a lot of people
I am going to do it and I will come back with the result.Thank you.
@ENRIQUE_TORRES I had similar issue, you need to let the watch battery completely drain, leave it trying to turn on even.
Then, plug it on a MAINS CHARGER - NOT USB, until about 20% minimum charge.
I have then flashed " w812a_kk.x1.common.72kk.emmc.160414-122116 " found on G+ at
using the SPTools provided in the
Make sure you do not knock the USB cable or unplug during flash, or you will have to start all over with letting battery drain complete again.
@ENRIQUE_TORRES did you have any success