Didn’t realize I had to select the menu tab and then select download. For some reason I thought when I pressed on the Drive file it would automatically start downloading. Thanks to both “pablo11” and “noidremained”!!! THIS SAVED MY INVESTMENT IN THIS WATCH BECAUSE IT IS NOW A FUNCTIONAL PROPERLY WORKING DEVICE AGAIN!!! Hopefully someday I can be of assistance to the two of you or others who are here on this wonderful forum seeking help
Seems like I have bricked mine with similar white bars showing on my device on power up after trying to install the TICWRIS_MAX_V1.9_20200713_20200712_072642 firmware.
I found this thread and attempted to use the DM100_LEMT_V1.1_20200717D and DM100_LEMT_V2.0_20200713_20200712_062848 firmware to roll back to, but no joy.
On the Smart Phone Flash Tool, I have the following setup to try and roll back to the LEM firmware, is this correct? Not sure if I am doing something wrong or if I have bricked it.
So, is your watch a LEM T DM100 or MAX-S /Note DM101?
You must use the correct model firmware for your watch.
They are not interchangeable.
I hope you have a DM100 LEM T because your photo shows that you are flashing a LEM T DM100.
I believe it is a DM100 as it is a LEMFO branded watch, did they also release with a similar DM101?
Usefully there are no model numbers on the box/in the manual/on the device, however it has a silver bezel around it and 2 buttons on the right of the watch (one with a red marking) so appears to be a DM100/LEM T.
Tried to flash with DM100 firmware I could find on here, but still have the bars, it does appear to boot (makes sound after starting), but the screen stay white bar looking.
I bought it second hand, turns out it was a DM101, uploaded the Ticwris firmware MAX-S 1.9 firmware and it is working fine again… in hindsight it was a bit sloppy not to have checked the current firmware version before flashing, you live and learn, I will be more diligent around such things, I should know better.