Here is some data about my new Q7 Plus:
Hardware : MT6580M
Model : Q7 PLUS
Build number : LMY47I test-keys
Build date UTC : 20170913-094159
Android v : 5.1
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V20, 2015/12/03 19:50
Kernel v : 3.10.72+ (sw04@PowerEdge-R710-01) (gcc version 4.8 (GCC) ) #1 SMP Wed Sep 13 17:51:00 CST 2017
C:\ADB>fastboot getvar all
(bootloader)
max-download-size: 0x8000000
(bootloader)
partition-size:userdata: 32000000
(bootloader)
partition-type:userdata: ext4
(bootloader)
partition-size:cache: 10000000
(bootloader)
partition-type:cache: ext4
(bootloader)
partition-size:system: 40000000
(bootloader)
partition-type:system: ext4
(bootloader)
partition-size:metadata: 2760000
(bootloader)
partition-type:metadata: raw data
(bootloader)
partition-size:nvdata: 2000000
(bootloader)
partition-type:nvdata: ext4
(bootloader)
partition-size:frp: 100000
(bootloader)
partition-type:frp: raw data
(bootloader)
partition-size:expdb: a00000
(bootloader)
partition-type:expdb: raw data
(bootloader)
partition-size:logo: 800000
(bootloader)
partition-type:logo: raw data
(bootloader)
partition-size:para: 80000
(bootloader)
partition-type:para: raw data
(bootloader)
partition-size:keystore: 800000
(bootloader)
partition-type:keystore: raw data
(bootloader)
partition-size:secro: 600000
(bootloader)
partition-type:secro: raw data
(bootloader)
partition-size:oemkeystore: 200000
(bootloader)
partition-type:oemkeystore: raw data
(bootloader)
partition-size:recovery: 1000000
(bootloader)
partition-type:recovery: raw data
(bootloader)
partition-size:boot: 1000000
(bootloader)
partition-type:boot: raw data
(bootloader)
partition-size:lk: 60000
(bootloader)
partition-type:lk: raw data
(bootloader)
partition-size:seccfg: 40000
(bootloader)
partition-type:seccfg: raw data
(bootloader)
partition-size:protect2: a00000
(bootloader)
partition-type:protect2: ext4
(bootloader)
partition-size:protect1: a00000
(bootloader)
partition-type:protect1: ext4
(bootloader)
partition-size:nvram: 500000
(bootloader)
partition-type:nvram: raw data
(bootloader)
partition-size:proinfo: 300000
(bootloader)
partition-type:proinfo: raw data
(bootloader)
partition-size:preloader: 40000
(bootloader)
partition-type:preloader: raw data
(bootloader)
off-mode-charge: 1
(bootloader)
warranty: yes
(bootloader)
unlocked: no
(bootloader)
secure: yes
(bootloader)
kernel: lk
(bootloader)
product: W637_WGL
(bootloader)
version: 0.5
all: Done!!
finished. total time: 0.188s
I want to get the watch Backed Up first, then Unlock the Bootloader, Install a working Recovery, Flash Supersu to Root it, but need some help getting things set up right in SP Flash, and MTK Android Tools.
Drivers are installed on my Windows 7 Ultimate 64bit system, and I can get connected in both programs.
I need to know the proper memory address settings to get a good backup in SP Flash tool (for creating a valid “ROM_0” backup". Start Address 0x00000000, but What Length?
Looks like my Bootloader is Locked from the Factory (Fastboot Getvar all dump) - I have tried "fastboot oem unlock, but it just gives me “…” , and hangs. So I hope I am not screwed by having a true Locked Bootloader on this newew firmware!
Is there a good recovery that will not Brick my watch? Specifically for this variant of the Q7 Plus?
I think this newer Q& Plus may have to wait for a little more attention from people that know more than me about this sort of customizing the system. I have Rooted a lot of cell phones, and know just enough to get into trouble if not careful, but am just now getting into the Smart Watch scene. Thanks for any help, or advice you can give. techaddict/Jay