Anyone have the correct proceedure to flash a LF16 Lemfo.

General General Discussion
1

Anyone have the correct proceedure to flash a LF16 Lemfo. I have tried a few methods and it does not seem to work. When I plufg the usb cable with the phone off, The phone goes into charging mode and will not respond to the flash tool. So there must be a trick for the LF16. If anyone can shed some light on the procedure, that would be great. Thanks

2

There is no firmware for the LF16

3

yes I found one. Here is the google drive link.
https://drive.google.com/open?id=0B9ywilOUMvBUbHdlQy1ENTF4QTg

4

Thankyou very much

5

@Pablo_Eleven_Pablo11 ​, you will try to install this? Let me know if it work. I have a DM368 and I would like to try after hearing your opinion on this.

6

This firmware is dependent on what screen you have. Notice it has HEHUI in the version?
If your watch has this in the version already installed, that’s fine you can use it.
If it doesn’t have these letters in the current version you should not use it. It will make your screen not work if you use the wrong version…

7

Ok @Pablo_Eleven_Pablo11 ​, Mine has the same. It’s the same version, diff is just a week in date. 20161116

8

I personally have not tested it but I was told it is the original firmware supplied by Lemfo for the LF16. I keep is as a backup incase I corrupt mine. But I assume that the DM368 is basically a LF16 under a different brand name. It’s has the identical hardware. So you should be safe to flash your watch if it is required. Is your firmeware corrupt on your watch?

9

My firmware is ok. I will try only if i need. Thanks for the link!